Firmware Update

Vantrue E2 with Vantrue 512 GB SD Card

Firmware E2_VT-EBK161

Order No. 16233

I am unable to upgrade my Firmware to the latest version, this is what I have done:

!. Format SD Card

2. Download Firmware Version: E2_VT-ECA061 to computer

3. Connect dashcam to computer

4. Copy and Paste Firmware from computer to SD Card

5. Disconnect dashcam from computer

6. Power up Dashcam

7. Wait a while

8. Format the SD Card

I Tried a couple of times without success, what am I doing wrong?😓

UPDATE

Sorted, but for the sake of others who may encounter this problem, here is a possible solution;

1. The Firmware Version is Version: E2_VT-ECA061.bin

2. However the downloaded file is named VT_E2.bin

3. Now, if you have previously downloaded an earlier Firmware update and it is still on your computer, in the same folder, the latest downloaded Firmware Version will be VT_E2(1).bin. This will not update.

4. To ensure that you do not encounter this problem, make sure that you delete any previous downloaded Firmware updates before you download the latest Firmware.😂

Hope this helps.