Hi there,
I'm new on E1, just brought few days ago, I have few questions when i went through the setting, hope someone could help me out
Any E1 user manual available online which i can access
Does E1 support daylight saving?
What is the frequency 50hz/60Hz use for? video ?
What is lookback video for, it is default to 1 minute, any impact if i set to 3 or higher
Does E1 continue recording the stream until the SD card full, then overwrite previous one?
Anyway to use parking mode, it is off, not able to change on, instead of motion detection mode
Thanks in advance.
Best regards
Sherman
Hi Sherman, please check below answers for your questions. Thanks.
You can download the User Manual for E1 dash cam from this link https://www.vantrue.net/Support/flleDlist/p_id/205/file_type/1.html
E1 has an automatic time update function. After connecting to the mobile phone WIFI, it will be forced to synchronize with the time zone of the mobile phone (you can choose to turn it on or off, and it is turned on by default). As long as the time of your mobile phone is correct, the dash cam can be synchronized.Indirectly realize the conversion between winter time and daylight saving time.
The 50Hz and 60Hz are allocated according to the grid frequency of different countries, and the United States is 60Hz.
What do you mean lookback video exactly? Do you refer to the loop recording? If yes, you can change to 3 or 5 which has no impact.
If you turn on loop recording, it will auto overwrite old video files when the card gets full. If you turn off it, it will stop save new video recordings when the card gets full.
To use the parking mode, you need to connect the cam to constant power. Is there any issue you have while using this function?
Best regards,
Vantrue Team